MAKİNO CNC PROJECT : MAKİNO CNC DESIGN BY : DR.M.SİNAN GENİM On the basis of the inertia calculations 120mm vertical coloumns were used in the building. In some deaf parts of the structural silicon curtain wall system, silicone panels were mounted at on the existing silicone system in the form of frame panels. 5cm Roofmate 30 SL heat isolation was applied behind all the deaf parts. The building, which is located in cold climate area, three roomed isolation system is used for the woodwork profiles. In this system the heat isolation barriers are supported by 6,6 fibro glass, heat transfer coefficient is 2.95 W/m2K. In the parts containing glass, they are stuck by means of silicone with DC 983 component and bands. By means of this system, resistance against all kinds of pressure forces, cutting forces, continuous motions, weather conditions, temperature changes (between -45C and +50C ) was obtained successfully. Composite panel curtain wall system was mounted on the H profile carcass by means of cold facade system. At the building entry a specific twisted glass eave made of 10mm tempered glass with +1,76 PVB + 1mm tempered glasscombination and it was connected by vantuz holders made of Inox A4 quality steel with a steel tension carrying system.