SAHSUVAR PLAZA PROJECT : SAHSUVAR PLAZA DESIGN BY : SENYUVA ALUMİNİUM Several application samples of the aluminıum, which is the material of 21st century can be seen on the building facade. Leveled heat glass system was fixed on the aluminium panels via by using Norton band and bonding method and SS2000 structural silicon curtain wall system was formed by fixing these panels to the 50mm wide carrier panel. Silicon and bands containing DC 983 component was used for binding. By means pf this system resistance against any kind of pressure forces, cutting forces, continuous motions, air conditions, temperature changes ( between -45 and +50 C ) and chemical corrosion was obtained successfully. The reflection glass with 15% transparency was used and the heat transfer coefficient of the cladding is 2.74 W/m2.K. Composite panels are used since the deaf surfaces of the building have to be made of a material that does not caused a heavy load for the building (5.5 kg/m2). Due to the vertical length of the front side a curving shape was given to the middle part by steel construction. Steel panels was applied to this form in an easy manner since it can be shaped and procsses easily.